admin 管理员组文章数量: 1184232
2024年3月26日发(作者：ae文字特效模板下载)
MATERIAL SAFETY DATA SHEET
Bayer MaterialScience LLC
Product Safety & Regulatory Affairs
100 Bayer Road
Pittsburgh, PA
15205-9741
USA
TRANSPORTATION EMERGENCY
CALL CHEMTREC: (800) 424-9300
INTERNATIONAL: (703) 527-3887
NON-TRANSPORTATION
Bayer Emergency Phone:
Bayer Information Phone:
(412) 923-1800
(800) 662-2927
1. Product and Company Identification
Product Name:
Material Number:
Chemical Family:
Chemical Name:
2. Hazards Identification
Emergency Overview
CAUTION! Color: White Form: solid Pellets Odor: Slight.
Melted product is flammable and produces intense heat and dense smoke during burning.
Irritating gases/fumes may be given off during burning or thermal decomposition. May
cause mechanical irritation (abrasion). Causes a slipping hazard if spilled. Contact with
hot material will cause thermal burns.
Potential Health Effects
Inhalation, Skin Contact, Eye Contact
Primary Routes of Entry:
Respiratory disorders
Medical Conditions Aggravated by
Exposure:
HUMAN EFFECTS AND SYMPTOMS OF OVEREXPOSURE
Skin
Acute Skin
For Product: MAKROLON 2805 013334
Contact with heated material can cause thermal burns.
Eye
Acute Eye
For Product: MAKROLON 2805 013334
May cause mechanical irritation.
General Effects of Exposure
Material Name:
MAKROLON 2805 013334
Article Number: 502712
MAKROLON 2805 013334
502712
Thermoplastic Polymer
Bisphenol A Polycarbonate
Page: 1 of 7 Report Version: 1.10
Acute Effects of Exposure
For Product: MAKROLON 2805 013334
Gases and fumes evolved during the thermal processing or decomposition of this material may irritate the
eyes, skin or respiratory tract.
Chronic Effects of Exposure
For Product: MAKROLON 2805 013334
Not expected to cause any adverse chronic health effects.
Carcinogenicity:
Titanium dioxide (Rutile) IARC - Overall evaluation: 2B Possible carcinogen.
3. Composition/Information on Ingredients
Hazardous Components
The following potentially hazardous ingredient(s) are used to formulate this product. As supplied, the
ingredient(s) are bound in the polymer matrix. Because they are bound in the matrix, they are not expected
to create any unusual hazards when handled and processed according to good manufacturing and industrial
hygiene practices and the guidelines provided in this MSDS.
Weight %
Components CAS-No.
1 - 5% Titanium dioxide (Rutile) 13463-67-7
OTHER INGREDIENTS
Additional types of polycarbonate may be used as necessary to adjust the melt flow rate.
Weight %
Components CAS-No.
>=1% Bisphenol A Polycarbonate CAS# is a trade secret
4. First Aid Measures
Eye Contact
In case of contact, flush eyes with plenty of lukewarm water.
Skin Contact
In case of skin contact, wash affected areas with soap and water. Get medical attention if thermal burn
occurs.
Inhalation
If inhaled, remove to fresh air.
Ingestion
Get medical attention.
5. Fire-Fighting Measures
water, foam, dry chemical, carbon dioxide (CO2)
Suitable Extinguishing Media:
Special Fire Fighting Procedures
Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic
Material Name:
MAKROLON 2805 013334
Article Number: 502712
Page: 2 of 7 Report Version: 1.10
版权声明：本文标题：PC2805(MSDS) 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.roclinux.cn/b/1711426345a593453.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论