HPH系列J挂钩安装指南说明书

HPH Series J-Hook Installation Instructions

1

Mounting to a vertical surface: HPH16, HPH32, HPH48 and HPH64

Use a nail*, bolt* or screw* with a minimum head diameter of 0.329” (Fig.1-A) and an

appropriate length for the substrate (Fig.1-B) to fasten the HPH J-Hook (Fig.2) to the vertical

surface (Fig.3). Insert the cables and close the latch as shown in Fig.3. The latch must be in the

closed position as shown in Fig.4 to secure the cables and complete the installation.

Fig.1

Fig.2

Fig.3 Fig.4

Part

No.

Hook

Size

Fig.

No.

UL Load Rating Description

LBS. | N

20

17

20

17

88.96

75.62

88.96

75.62

HPH16

HPH32

HPH48

HPH64

1"

2”

3”

4”

2 & 4

1” Standard HPH J-Hook, size 16

2” Standard HPH J-Hook, size 32

3” Standard HPH J-Hook, size 48

4” Standard HPH J-Hook, size 64

2

Mounting to a rod or ceiling wire with a Multi-Function Clip-Batwing: HPH16W,

HPH32W, HPH48W and HPH64W

HPHXXW J-Hooks (Fig.1) are pre-assembled to Multi-Function Clip-Batwings at the factory using

a fastener such as a rivet or a zinc plated ¼-20 x 3/8” pan head Phillips machine bolt and a

grade A ¼-20 hex Nylon locknut (Fig.2). A plain HPH J-Hook may be assembled to a UL listed

batwing clip in the field with the use of a similar fastener. Depress the batwing between your

fingers (Fig. 3). Attach the HPHXXW to 12 gauge ceiling wire or 1/4" threaded rod (Fig.4 and

Fig.6).

Insert the cables and close the latch (Fig.5 and Fig.7). The latch must be in the closed

position as shown in Fig.8 to secure the cables and complete the installation.

Fig. 1 Fig. 2

Fig. 4 Fig. 5

Fig. 3

3

Fig. 6

Fig. 7

Fig. 8

Part No.

HPH16W

HPH32W

HPH48W

HPH64W

Hook

Size

1"

2”

3”

4”

Fig.

No.

1

&

8

UL Load Rating

LBS. | N

20

20

20

20

88.96

88.96

88.96

88.96

Description

1” Batwing HPH J-Hook, size 16

2” Batwing HPH J-Hook, size 32

3” Batwing HPH J-Hook, size 48

4” Batwing HPH J-Hook, size 64

4

Mounting to a rod or a horizontal surface with an Angle Clip 90°: HPH16AC, HPH16AC6

HPH32AC, HPH32AC6, HPH48AC, HPH48AC6, HPH64AC & HPH64AC6

HPHXXAC and HPHXXAC6 J-Hooks (Fig.1 and Fig.2) are pre-assembled to Angle Clips 90° at the

factory using a fastener such as a rivet or a zinc plated ¼-20 x 3/8” pan head Phillips machine

bolt and a grade A ¼-20 hex Nylon locknut (Fig.3). A plain HPH J-Hook may be assembled to a

Platinum Tools Angle Clip 90° in the field using a similar fastener. Fasten the HPHXXAC or

HPHXXAC6 to 1/4" or 3/8” threaded rod using two standard hex nuts (Fig.4). Thread a single nut

up to the desired location of the threaded rod. Guide the HPHXXAC or HPHXXAC6 onto the

threaded rod. Thread a second nut onto the threaded rod and tighten to the first nut, thereby

sandwiching the Angle Clip 90° between the two nuts (Fig.5). An HPHXXAC or an HPHXXAC6

may be fastened directly to the underside of a horizontal surface using an appropriate fastener*

(Fig.6). Use a fastener with an appropriate head diameter (Fig.7-A) and an appropriate length

for the substrate (Fig.7-B). Place the cables in the hook and close the latch as shown in Fig.5

and Fig.6. The latch must be in the closed position as shown in Fig.8 and Fig.9 to secure the

cables and complete the installation.

Fig.1 Fig.2

Fig. 3

Fig. 4 Fig. 5

5

Fig. 6

Fig. 7

Fig. 8 Fig. 9

Part No. Hook Fig.

Size No.

1"

1”

2”

2”

3”

3”

4”

4”

1

2

1

2

1

2

1

2

UL Load

Rating

LBS. | N

20

20

20

20

20

20

20

20

Angle Clip Description

Hole Size

1/4"

3/8”

1/4"

3/8”

1/4"

3/8”

1/4"

3/8”

1” 90° Angle HPH J-Hook, size 16

1” 90° Angle/6 HPH J-Hook, size 16

2” 90° Angle HPH J-Hook, size 32

2” 90° Angle/6 HPH J-Hook, size 32

3” 90° Angle HPH J-Hook, size 48

3” 90° Angle/6 HPH J-Hook, size 48

4” 90° Angle HPH J-Hook, size 64

4” 90° Angle/6 HPH J-Hook, size 64

HPH16AC

HPH16AC6

HPH32AC

HPH32AC6

HPH48AC

HPH48AC6

HPH64AC

HPH64AC6

88.96

88.96

88.96

88.96

88.96

88.96

88.96

88.96

6

Mounting to a horizontal surface with an Angle Clip 90° w/Powder Actuated Nail

(PAN): HPH16ACPA, HPH32ACPA, HPH48ACPA and HPH64ACPA

Use a powder actuated tool* to install the 1-5/16” pin into an appropriate material such as

concrete as shown in Fig. 3 & 4.

Fig.1 Fig.2

Fig.3 Fig.4

Part No. Hook

Size

1"

2”

3”

4”

Fig.

No.

1

&

2

Load Rating Description

LBS. | N

88.96

88.96

88.96

88.96

HPH16ACPA

HPH32ACPA

HPH48ACPA

HPH64ACPA

20

20

20

20

1” 90° Angle w/PAN HPH J-Hook, size 16

2” 90° Angle w/PAN HPH J-Hook, size 32

3” 90° Angle w/PAN HPH J-Hook, size 48

4” 90° Angle w/PAN HPH J-Hook, size 64

7

Mounting to a beam with an HOK24 or HOK58 Hammer-On Beam Clamp: HPH16HOK24,

HPH16HOK58, HPH32HOK24, HPH32HOK58, HPH48HOK24, HPH48HOK58,

HPH64HOK24 and HPH64HOK58

Secure a Hammer-On Beam Clamp to a flange using a hammer as shown in Fig. 5 & Fig. 6

below.

Note: The HOK-24 is designed for flanges from 1/8” to 1/4" thick; the HOK-58 is designed for

flanges from 5/16” to 1/2" thick.

Fig.1 Fig.2 Fig.3 Fig.4

Part No. Hook Fig.

Size No.

1"

1”

2”

2”

3”

3”

4”

4”

UL Load

Rating

LBS. | N

20 88.96

20 88.96

17 75.62

17 75.62

20 88.96

20 88.96

17 75.62

17 75.62

Designed

for flanges

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

Description

HPH16HOK24

HPH16HOK58

HPH32HOK24

HPH32HOK58

HPH48HOK24

HPH48HOK58

HPH64HOK24

HPH64HOK58

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1” Hammer-On HPH J-Hook, 1/8”-1/4” flange, size 16

1” Hammer-On HPH J-Hook, 5/16”-1/2” flange, size 16

2” Hammer-On HPH J-Hook, 1/8”-1/4” flange, size 32

2” Hammer-On HPH J-Hook, 5/16”-1/2” flange, size 32

3” Hammer-On HPH J-Hook, 1/8”-1/4” flange, size 48

3” Hammer-On HPH J-Hook, 5/16”-1/2” flange, size 48

4” Hammer-On HPH J-Hook, 1/8”-1/4” flange, size 64

4” Hammer-On HPH J-Hook, 5/16”-1/2” flange, size 64

Fig.5 Fig.6

8

Mounting to a beam with an FM24 or FM58 Hammer-On Beam Clamp: HPH16ACFM24,

HPH16ACFM58, HPH32ACFM24, HPH32ACFM58, HPH48ACFM24, HPH48ACFM58,

HPH64ACFM24

and HPH64ACFM58

Secure a knock-on beam clamp to a flange using a hammer as shown in Fig. 5 & Fig. 6 below.

Note: The ACFM24 is designed for flanges from 1/8" to 1/4" thick. The ACFM58 is designed for

flanges from 5/16" to 1/2" thick. Both the ACFM24 & ACFM58 can be rotated 360°.

Fig.1 Fig.2 Fig.3

Part No. Hook Fig.

Size No.

1"

1”

2”

2”

3”

3”

4”

4”

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

UL Load

Rating

LBS. | N

20

20

20

20

20

20

20

20

88.96

88.96

88.96

88.96

88.96

88.96

88.96

88.96

Designed for

flanges

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

1/8” - 1/4"

5/16 - 1/2”

Description

Fig.4

HPH16ACFM24

HPH16ACFM58

HPH32ACFM24

HPH32ACFM58

HPH48ACFM24

HPH48ACFM58

HPH64ACFM24

HPH64ACFM58

1” Hammer-On HPH J-Hook, Swivels 360°, 1/8”-1/4”

Flange, size 16

1” Hammer-On HPH J-Hook, Swivels 360°, 5/16” – 1/2"

Flange, size 16

2” Hammer-On HPH J-Hook, Swivels 360°, 1/8”-1/4”

Flange, size 32

2” Hammer-On HPH J-Hook, Swivels 360°, 5/16” – 1/2"

Flange, size 32

3” Hammer-On HPH J-Hook, Swivels 360°, 1/8”-1/4”

Flange, size 48

3” Hammer-On HPH J-Hook, Swivels 360°, 5/16” – 1/2"

Flange, size 48

4” Hammer-On HPH J-Hook, Swivels 360°, 1/8”-1/4”

Flange, size 64

4” Hammer-On HPH J-Hook, Swivels 360°, 5/16” – 1/2"

Flange, size 64

Fig.5 Fig.6

9

Mounting to a beam with a BC Beam Clamp: HPH16BC, HPH16ACBC, HPH32BC,

HPH32ACBC, HPH48BC, HPH48ACBC, HPH64BC and HPH64ACBC

Secure a screw-on beam clamp to a flange using a 3/8” socket driver or wrench as shown in

Fig.5, 6, 7, & 8 below. Tighten the bolt to 20 in-lb.

Note: The BC & ACBC’s are designed for flanges up to 1/2" thick. The ACBC can be rotated 360°.

Fig.1 Fig.2 Fig.3 Fig.4

Part No. Hook Fig.

Size No.

1"

1”

2”

2”

3”

3”

4”

4”

UL Load

Rating

LBS. | N

20

20

17

20

20

20

17

20

88.96

88.96

75.62

88.96

88.96

88.96

75.62

88.96

Designed

for

flanges

Description

HPH16BC

HPH16ACBC

HPH32BC

HPH32ACBC

HPH48BC

HPH48ACBC

HPH64BC

HPH64ACBC

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1/8” - 1/2"

1” Beam Clamp HPH J-Hook, Size 16

1” Swivel 360° Beam Clamp HPH J-Hook, size 16

2” Beam Clamp HPH J-Hook, Size 32

2” Swivel 360° Beam Clamp HPH J-Hook, size 32

3” Beam Clamp HPH J-Hook, Size 48

3” Swivel 360° Beam Clamp HPH J-Hook, size 48

4” Beam Clamp HPH J-Hook, Size 64

4” Swivel 360° Beam Clamp HPH J-Hook, size 64

Fig.5 Fig.6

10

Fig.7 Fig.8

Mounting to a beam with an SSBC Spring Steel Beam Clamp: HPH16SSBC,

HPH16ACSSBC, HPH32SSBC, HPH32ACSSBC, HPH48SSBC, HPH48ACSSBC, HPH64SSBC

and HPH64ACSSBC

Secure a screw-on beam clamp to a flange using a 3/8” socket driver, wrench or Phillips head

screw driver as shown in Fig. 5, 6, & 8 below. Tighten the bolt to 20 in-lb.

Note: The SSBC & ACSSBC’s are designed for flanges up to 1/2" thick. The ACSSBC can be

rotated 360°.

Fig.1 Fig.2 Fig.3 Fig.4

11

Fig.5 Fig.6

Fig.7 Fig.8

Part No. HooFig.

k No.

Size

1"

1”

2”

2”

3”

3”

4”

4”

UL Load

Rating

LBS. | N

20

20

17

20

20

20

17

20

Designed

for

flanges

Description

HPH16SSBC

HPH16ACSSBC

HPH32SSBC

HPH32ACSSBC

HPH48SSBC

HPH48ACSSBC

HPH64SSBC

HPH64ACSSBC

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

88.96

88.96

75.62

88.96

88.96

88.96

75.62

88.96

1/8” - 1/2"

1” Spring Steel Beam Clamp HPH J-Hook, size 16

1” Swivel 360° Spring Steel Beam Clamp HPH

J-Hook, size 16

2” Spring Steel Beam Clamp HPH J-Hook, size 32

2” Swivel 360° Spring Steel Beam Clamp HPH

J-Hook, size 32

3” Spring Steel Beam Clamp HPH J-Hook, size 48

3” Swivel 360° Spring Steel Beam Clamp HPH

J-Hook, size 48

4” Spring Steel Beam Clamp HPH J-Hook, size 64

4” Swivel 360° Spring Steel Beam Clamp HPH

J-Hook, size 64

12

Mounting to a joist with an Angled Overhang (AO) or Vertical Overhang (VO) spring

steel clip: HPH16AO, HPH16VO, HPH32AO, HPH32VO, HPH48AO, HPH48VO, HPH64AO

and HPH64VO

Secure an AO spring steel “Z” purlin clip or a VO14 “C” purlin clip to a joist using a hammer as

shown in Fig. 5, 6, 7, & 8 below.

Note: The AO14 is designed for flanges 1/8” - 1/4" thick.

Fig.1 Fig.2

Fig.5 Fig.6

Fig.3 Fig.4

13

Fig.7 Fig.8

Part No. Hook Fig.

Size No.

1"

1”

2”

2”

3”

3”

4”

4”

UL Load

Rating

LBS. | N

20

20

17

17

20

20

17

17

Designed

for

flanges

Description

HPH16AO

HPH16VO

HPH32AO

HPH32VO

HPH48AO

HPH48VO

HPH64AO

HPH64VO

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

1 & 2

3 & 4

88.96

88.96

75.62

75.62

88.96

88.96

75.62

75.62

1” Angled Overhang HPH J-Hook, size 16

1” Vertical Overhang HPH J-Hook, size 16

2” Angled Overhang HPH J-Hook, size 32

2” Vertical Overhang HPH J-Hook, size 32

1/8” - 1/4"

3” Angled Overhang HPH J-Hook, size 48

3” Vertical Overhang HPH J-Hook, size 48

4” Angled Overhang HPH J-Hook, size 64

4” Vertical Overhang HPH J-Hook, size 64

14

Mounting to threaded rod with a female threaded eye coupling: HPH16EH, HPH32EH,

HPH48EH and HPH64EH

Thread the eye coupling on to ¼-20 threaded rod as shown in Fig. 3, 4 & 5 below.

Fig.1 Fig.2

Fig.3 Fig.4 Fig.5

Part No. Hook

Size

1"

2”

3”

4”

Fig.

No.

1

&

2

Load Rating Description

LBS. | N

88.96

88.96

88.96

88.96

HPH16EH

HPH32EH

HPH48EH

HPH64EH

20

20

20

20

1” End Hook ¼-20 HPH J-Hook, size 16

2” End Hook ¼-20 HPH J-Hook, size 32

3” End Hook ¼-20 HPH J-Hook, size 48

4” End Hook ¼-20 HPH J-Hook, size 64

All HPH J-Hooks on pages 6 through 15 are special order. Call us for details and lead times.

* Consult the manufacturer’s instructions and load ratings before using on your application.

15