admin 管理员组文章数量: 1184232
2024年12月29日发(作者：propertyinfo在数据库里是什么意思)
®
Zio Lite Wall Modules
TR40 AND TR42 MODELS WITH SYLK
™
PRODUCT DESCRIPTION
The TR40 and TR42 are 2-wire, non-polarity sensitive, Sylk
communicating wall modules, which communicate with all
Spyder
®
controllers that are enabled with Sylk. Not compatible with
programmable controllers and ComfortPoint™ Open
Stryker
®
controllers.
The TR40 and TR42 are simple temperature wall modules
with basic setpoint, override, and fan options, and are
designed for a broad range of applications. Models are
available that include humidity and CO2 sensing.
NOTE:Refer to the forms listed below for more details.
—
—
62-0467 Installation Instructions
—
63-2741 Operating Guide
38-00003 Engineering Guide Spec
SPECIFICATION DATA
FEATURES
The TR40 and TR42 wall modules include:
•Two wire, polarity insensitive Sylk provides both power
and communication to the device.
•Models available with display (TR42) or without display
(TR40).
•Models available with or without built in humidity or
CO2 sensors.
All TR42 display wall modules include:
•Override option
•Ability for tenant to change between °F and °C
•Ability to provide tenant either a relative "warmer-
cooler" setpoint adjustment or absolute temperature
setpoint adjustment
•Fan speed options:
Low-Med-High (Not available on ComfortPoint Open
Auto-On, Auto-Off-On, Auto-Off-
VAV applications)
•For Spyder/Niagara users, an installer mode with
optional password protection that allows:
•Switching between °F and °C
•Temperature calibration
•Humidity calibration
•Numerical or Graphical setpoint adjustment
•Adjustment of the Setpoint Range Limits
•Adjustment of override time (Choose Network
Time or 1-24 hours)
•Choosing the sensor or setpoint value to be
shown in the Home Screen, or choose to scroll
through sensor and setpoint values
•Choosing between English and International
icon display
•For ComfortPoint Open users, installer mode is
removed from configurations. All configuration is via
studio tool
63-1389-04
ZIO
®
LITE WALL MODULES
SPECIFICATIONS
Models: See Table 1 for a list of models with description.
Environmental Ratings:
•Operating Temperature:
•Operating Range: 32 to 125°F (0 to 52°C)
•Setpoint Limit: 50 to 149°F (10 to 65°C) (Spyder/
Niagara users only)
•Shipping Temperature: -40 to 150°F (-40 to 65.5°C)
•Relative Humidity: 5% to 95% non-condensing
Accessories:
50007298-001 (pack of 12) medium, cover plate;
6-7/8 x 5 in. (175 x 127 mm).
Approvals: CE; UL94-V0 plastic enclosure; FCC Part 15,
Class B
Accuracy:
•Temperature: ± 0.2°C at 25°C (± 0.36ºF at 77ºF)
•Humidity: ±3% RH from 20-80%RH
•CO2: ±(30ppm +3% of measured value).
•Calibrated at the factory.
•Uses automatic background calibration. No
calibration required for the life of the product.
•Meets CEC Title 24 requirement of ±75ppm
accuracy at 600ppm and 1000ppm ambient levels.
•For proper CO2 operation, install only in spaces that
see at least 4 hours of continuous unoccupied time
per week.
Table 1. Part Descriptions.
Part
TR40
TR40-H
TR40-CO2
TR42
Description
Wall Module, Temp only, Sylk
Wall Module, Temp and Humidity, Sylk
Wall Module, Temp and CO2, Sylk
LCD Wall Module, Temp only, Sylk
Sensors
Temperature
Temp, Humidity
Temp, CO2
Temperature
Communication
Sylk
Sylk
Sylk
Sylk
None
None
None
None
Configurable:
Temp Setpoint Adjust,
Override, Fan (if FCU app)
Configurable:
Temp Setpoint Adjust,
Override, Fan (if FCU app)
Configurable:
Temp Setpoint Adjust,
Override, Fan (if FCU app)
Configurable:
Temp Setpoint Adjust,
Override, Fan (if FCU app)
Interface
TR40-H-CO2Wall Module, Temp, Humdity, CO2, SylkTemp, Hum, CO2Sylk
TR42-HLCD Wall Module, Temp and Humidity, SylkTemp, HumiditySylk
TR42-CO2LCD Wall Module, Temp and CO2, SylkTemp, CO2Sylk
TR42-H-CO2LCD Wall Module, Temp, Humidity, CO2, SylkTemp, Hum, CO2Sylk
Communications
The wall modules use the two wire polarity insensitive Sylk for
communication with the programmable controller.
Setting the Wall Module Address Dial
Every Sylk device wired to a single controller must have a
unique address. The address on the wall module must match
the address in the control logic.
Compatibility
For Spyder/Niagara users, the TR40/42 models work with
Spyders manufactured after date code 1220, and work with
any Spyder Micro BACnet. Be sure to use an updated Spyder
tool to get the TR40/42 functional support.
Also compatible with the ComfortPoint
™
Open CPO-VAV2A
direct coupled, VAV box controller-actuator.
Sylk Device Capacity
For ComfortPoint Open controllers, a maximum of three (3)
TR40/42s can be supported by a single controller.
For Spyder controllers, to determine the maximum number of
Sylk devices, including Zio Lites, please refer to the Sylk
Device Capacity Calculation Tool on the Buildings Forum. Sylk
Capacity can also be determined, and should always be
verified, using the Resouce Usage view in the Spyder Tool
itself. Total Sylk proxy file memory, total Sylk power
consumption, and total Sylk bandwidth must all fall below
maximum limits.
By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or
modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any
liability, cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature by you.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
® U.S. Registered Trademark
© 2015 Honeywell International Inc.
63-1389—04 M.S. Rev. 12-15
Printed in United States
版权声明：本文标题：诺基亚HVAC控制模块TR40和TR42产品介绍说明书 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.roclinux.cn/p/1735550937a1675993.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论