admin 管理员组

文章数量: 1087131

计网实验

环境：Cisco Package Tracer

实验内容下载地址：Packet Tracer 8.0.1 labs - Packet Tracer Network

本次实验为lab1：Basic switch setup，实验内容简单描述：

Lab instructions

This lab will test your ability to configure basic settings such as hostname, motd banner, encrypted passwords, and terminal options on a Cisco Catalyst 2960 switch emulated in Packet Tracer 7.3.1.

1. Use the local laptop connect to the switch console and configure the laptop with the right parameters for console access to the Cisco 2960 Catalyst switch

2. Configure Switch hostname as LOCAL-SWITCH

3. Configure the message of the day as "Unauthorized access is forbidden"

4. Configure the password for privileged mode access as "cisco". The password must be md5 encrypted

5. Configure password encryption on the switch using the global configuration command

6. Configure CONSOLE access with the following settings :
- Login enabled
- Password : ciscoconsole
- History size : 15 commands
- Timeout : 6'45''
- Synchronous logging

6. Configure TELNET access with the following settings :
- Login enabled
- Password : ciscotelnet
- History size : 15 commands
- Timeout : 8'20''
- Synchronous logging

7. Configure the IP address of the switch as 192.168.1.2/24 and it's default gateway IP (192.168.1.1).

8. Test telnet connectivity from the Remote Laptop using the telnet client. 

1.下载完成后打开，双击Local laptop

2.选择destop中的terminal打开

 3.回车 即可进入编辑

 

 4.输入实验命令

 

本文标签： 计网实验

版权声明：本文标题：计网实验 内容由网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：http://www.roclinux.cn/b/1688325963a206454.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。